Engine Cleaning in Brewster, New York

Remove The Dust, Dirt, and Debris To Get A Like-New Condition Again

Your Engine Bay Will Look 10x Better

Whether you just purchased your vehicle, plan on selling it, or just want to give it some well needed TLC, your engine will look much better once we’re done.

Not only does a clean engine bay make your car look better (legend has it, it’s also faster), but it helps you diagnose car problems easier. You’ll be able to quickly tell where the cause of leak is or if anything has torn.

Here’s Our Engine Cleaning Process:

1) Inspect engine bay: We want to make sure there’s nothing that we need to keep an eye on during the cleaning.

2) Cover sensitive areas: Depending on the car, this might be the battery, intake, etc…

3) Spray and agitate: This is where the heavy work is done with multiple brushes and cleaners.

4) Dry and blow any water: Now it’s time to dry the entire engine bay (including all the water in the tight areas).

5) Final touch up and dress plastic: Wrapping up the engine, we’ll touch up any areas that need it and shine up all the plastic panels.

A lot of our customers are worried about cleaning their engine bay themselves as they think they might cause some type of damage. And just like anything else, without the proper tools, knowledge, and skills, you could cause some damage.

So when you have us go out to clean your engine, you can be sure we have all the proper knowledge, skills, and tools to get the job done properly with no damage whatsoever.

Start price: May vary based on size, condition, and type of engine bay.
*NOTE: Certain criteria is required for this service*

$80

Notice: We no longer offer engine cleaning as a stand-alone service. It'll need to be combined with at least one other service.

Engine Cleaning FAQs

  • Unfortunately, if the oil/grease leak is too heavy, we won’t be able to clean it up. It gets into all the nooks and crannies of the engine bay and we’re not physically able to reach all those areas. If the leak has been there for a while, it makes it even more difficult to clean up. Our engine bay cleanings focus on the top-level surface.

  • At this time, we no longer offer this as a standalone service. You’ll have to pair it with another service for us to come out to you.

  • In a shortened version, it goes: inspect the engine > cover any sensitive areas > thoroughly spray and agitate > dry off bay> apply dressing to plastic and rubber.

    Since there’s so many intricate areas to the engine bay, we have a lot of different brushes to help us reach all those areas.

  • It depends on the size, condition, and complexity of the engine bay. Generally speaking, it takes less than 45 minutes.

  • Yes! Once we’ve cleaned and dried off the engine bay, we’ll use our water-based dressing and apply it to all the plastic and rubber areas.

  • It depends on the car you have and how you take care of it. Some cars are sealed off pretty good and don’t allow as much water, dirt, and debris to enter. So it stays relatively clean for a while.

    Other cars that have wide open grilles and are not as sealed off, it makes it much easier for dirt, water, and debris to get in there. Wiping the engine bay once a month (or whenever you wash the vehicle) will help keep it in great condition.

Get in touch.

If you want to schedule or you need more information, please fill out this form below. We will be with you as soon as possible. We look forward to hearing from you!